All about strutoplast mattresses

The previously known foam rubber was replaced by a completely new material - strutoplast. It is distinguished by its affordable cost, easy maintenance and no problems during operation.

A strutoplast mattress is a good cost saving. When describing a material, it is worth specifying its properties:

• non-woven;
• three-layer;
• spring.

The material is created artificially. It contains polyester fibers, which are bonded together by a thermal method. The bonding element in the composition is considered to be a low-melting fiber. As a result of certain processes, a homogeneous mass is obtained at the outlet, which is used as a flooring. The inner layer is load-bearing, the outer layers hold the product together. At the carrier layer, the fibers are arranged vertically, sometimes there is a slight slope.

Strutoplast has a lot of advantages, which must be said about:

• complete absence of an allergic reaction, which is why strutoplast is used in the creation of children's mattresses;
• during the production process, special impregnations are used, therefore such a product does not burn;
• insects will not live in strutoplast, so the mattress can be laid even in a country house;
• complete absence of smell, and the material itself does not absorb them from the environment;
• orthopedic material, quite elastic and springy;
• well ventilated;
• contains only natural fibers; depending on which one is used, the mattress acquires the unique properties of the filler;
• can be easily cut, so it is not difficult to make your own mattress.

Strutoplast is not devoid of disadvantages. Some users report increased stiffness and squeakiness during use. This is one of those materials that has an impressive percentage of subsidence. The indicator is 30% of the initial volume. The first changes can be noticed within six months after using the product. This negative quality is characterized by cheaper models made from recycled polyester. Strutoplast stands out for its practicality, safety and low cost. Products made from it are comfortable, comfortable, they are perfect for sound sleep.

It is impossible not to say about the significant orthopedic effect. Strutoplast with additional components perfectly supports the spine, while the load is evenly distributed. This is especially important for the internal organs. After sleep, when a person gets up, the mattress quickly takes on its original appearance. Due to the unique properties, namely: excellent ventilation and hygroscopicity, products from the described material can be used outdoors or indoors, which is characterized by a high level of humidity.

Despite the fact that strutoplast is an artificial product, due to additional fillers, it is possible to improve the performance of the product. For this reason, natural ingredients are added, including bamboo, wool and others. Let's consider them in more detail.

Not every wool can be used. Sheep or camel only. Such fibers have low thermal conductivity and are well ventilated.

This component has two advantages:

• hygroscopic;
• dries quickly.

As noted by the manufacturers of mattresses, which contain algae, they have a positive effect on the skin.So far, this statement has not been scientifically confirmed in any way, since the algae are not only in the case, but also mixed with polyester.

Material advantages:

• hygroscopicity;
• light weight;
• strength.

In combination with polyester, a product is obtained that is not only well ventilated, but also has the proper hygroscopicity.

It is not the shell that is stacked, but the fiber. Due to it, it is possible to achieve the necessary rigidity.

Children's mattresses made of strutoplast are made with dimensions of 60x120 cm. If this is an adult or teenage single product, then the length is always 2 meters, but the width may vary. In centimeters, this is:

• 70;
• 80;
• 90.

For one-and-a-half adult and teenage mattresses, dimensions of 120x200 cm are popular.

As in the case of single pieces, doubles have a length of 2 meters and a width:

• 140;
• 160;
• 180.

Turning to one of the main advantages of strutoplast, it must be said that this material is unpretentious in maintenance. However, the user is required to comply with the special conditions dictated by the manufacturer. In many ways, they relate to the operation process.

• The mattress topper protects the product from dirt and moisture.
• To avoid sagging, turn the product over regularly.
• Even if water gets on the mattress, they remove the mattress topper and put it against the wall so that it dries out.
• Regular vacuuming protects against dust accumulation.

Most users note a characteristic feature of strutoplast products - increased rigidity. For some, it turns out to be excessive. If we are talking about a new product, then this is always an ideal ratio of quality and price. On the negative side, the service life is lower than most manufacturers claim. This is due to the fact that strutoplast, regardless of the filler, is quickly pressed through and loses its shape. The material is caked, and after 6 months of active operation, you can see small dents.

At the same time, users noted an anti-statistical effect, as well as the absence of an allergic reaction to the constituent components. For some people, this property plays an important role when it comes to safety and comfort. When using mattresses from the described material, the so-called "cold touch effect" is not observed. There is no stickiness at all, and the sleeping person's temperature is maintained in the best possible way.

The product is easy to care for, it is easy to clean. No special means for processing and disinfection are required, you can use those that are in every home. If the increased rigidity of the structure does not play a big role for the user, then a strutoplast mattress is an ideal and inexpensive solution that helps to properly organize a sleeping place.