Belarusian mattresses Vegas

Each of us knows that the quality of sleep directly depends on the design of the mattress, which can provide maximum support for the spine. There are many manufacturers of this product on the modern market, among which the Belarusian company Vegas can be distinguished. Its products are known far beyond the borders of the country.

Production facilities are located in the city of Brest. The first consumers were exactly the inhabitants of Belarus, who positively assessed the quality of the products. That is why the CIS countries also began to show interest in the products of this brand. All products are distinguished by quality and wear-resistant materials that meet European standards. The fillers are independent springs Agro (from a German manufacturer), latex (from Belgium), Memory Foam Vita Baltic (Great Britain). Other fillers are also used, which are the result of cooperation between British and Belarusian companies.

Latex is used in the production of mattresses, which is a natural material made from the sap of a rubber tree. Its most important qualities are good elasticity and hygiene. Polyurethane foam is highly elastic despite being synthetic and porous.

Only thanks to him, such important elements of the bed are distinguished by orthopedic properties, are resistant to moisture and are good for air permeability. Vegaflex also has good prosthetics and elasticity. MemoryFoam makes the sleeping place as comfortable as possible, as it is characterized by the memory effect and follows the curves of the body.

Linen is not only a natural and safe raw material that acts as a protective layer of a mattress. Thanks to it, the mechanical effects of the springs on the soft layers of the product are compensated and reduced, thereby extending its service life. Orto Hemp is a natural raw material that is created from hemp fibers that are connected to each other by needling.

The material is quite dense, it creates all the necessary conditions for supporting the body. Only due to its flexibility, the product easily follows the curves of the sleeper's body. Like-a-Latex is made of foam and is very similar to natural latex in structure and properties, and its high density and elasticity make the product durable and resistant to heavy loads.

Sample F3 is characterized by moderate rigidity and excellent orthopedic properties. It is recommended for the younger generation, as it supports the sleeper's muscle corset well and straightens the posture. In the design of the model there is a modern block of independent steel-type springs, which have transverse zones of stiffness, it allows the body to sit on the mattress in the most comfortable position, regardless of what figure the sleeping person has.

The mattress is framed with a polyamide net, thanks to which the contact of the cover with the inner layers is reduced. There is a zipper along the perimeter of the mattress, thanks to which the cover is divided into 2 parts. A durable foam material is also contained in the mattress, preventing it from sagging and changing shape. The layers of the mattress are composed of coconut coir, Vegaflex and Orto Hemp. The height of the product is 22 cm, the largest load on one berth is 130 kg. The number of springs per 1 m2 is 256.

The F5 model is intended for those who like sleeping places with medium hardness. The clever combination of spring block and natural materials guarantees perfect spine support. The product is designed for different age categories, starting from 4 years old. Its height is 22 cm, the largest load on one berth is 120 kg.

The base block of the mattress consists of Medizone R1000 with 250 springs per 1 m2. The mattress is completed with a removable cover. The furniture mesh separates the spring block from the delicate flooring layers, preventing premature wear of the components.

The F1 mattress is the toughest model in the range. Designed for large sleepers. The height of the product is 22 cm, the maximum load on one berth is 120 kg. The main block of the mattress consists of Medizone R1000 with 256 springs per m2. The removable cover is made of Bambootex. The main layer material is coconut coir.

The interior is equipped with a separate Medizone R1200 spring block, which consists of 7 zones. The arrangement of the springs in the form of a honeycomb increases the orthopedic properties of the product, following the curves of the body as much as possible. The very hard side is made of coconut coir and a latex plate with a special relief shape, therefore it is recommended to sleep on it for people weighing more than 90 kg, as well as for adolescents and children, so that the spine is correctly positioned and posture is formed.

The second side, in turn, has an average degree of rigidity and is suitable for people aged 20 to 50 years with an average build and weight, as well as those who lead an active lifestyle. The height of the product is 23 cm, the maximum load on one berth is 160 kg.

The M4 mattress is the toughest of the collection. An asymmetric product has sides that differ in rigidity. The base is Medizone R1200, which consists of a block of independent springs made using a unique technology from seven different stiffness zones. It is thanks to this arrangement of the springs that the orthopedic effect of the mattress occurs. One side is made of dense latex coconut coir for maximum rigidity. The other side consists of a thin layer of coconut coir and a latex slab with a textured surface and a massage effect

Thanks to this combination, this side is less rigid. Both surfaces contribute to the correct formation of posture, therefore, they are intended for children and adolescents, as well as young people under 25 years old. At this age, the body is at a developmental stage, therefore, with the help of mattresses, you can influence your posture. It is this model that can be recommended for people weighing over 90 kg. The height of the product is 23 cm, and the maximum load on the berth is 140 kg.

The X2 mattress is a jewel in the range of models in this series, as it is a luxurious piece for those who love new sensations. Provides a massage effect and maximum comfort. Its height is 24 cm, it is recommended for people over 18 years old. The largest load on the berth is 120 kg. The sides have different degrees of hardness: one is medium, the other is medium soft. The main block of Medizone R2200 consists of 550 springs per 1 m2. The cover is made of high-strength premium jacquard fabric. The layers of the product are made of latex, linen, Climalatex, Orto Hemp.

L2 mattress is designed to correct the posture of adolescents, as natural materials reliably support the young muscle corset. The product also uses cotton linen. This model is the most rigid, as it alternates layers of two materials (coconut and latex), providing firmness and elasticity. Cotton linen creates a pleasant microclimate and guarantees the circulation of air and moisture.

The coconut board was also used to create the required stiffness. The cover is made of Lyocell vital knitted fabric. The product is intended for children over 4 years old and adults over 50 years old. Its height is 20 cm, the largest load on one berth is 110 kg. All sides have the highest degree of rigidity.

• The Smart Profit Vegas mattress is a spring product for those who like to sleep on a firm base. One side is made of coconut coir, the other is coconut coir with Smartflex softening material. Height - 21 cm, maximum load - 100 kg per berth.

• The Tempo springless mattress has a medium firmness. The basis of the product is Smartflex material, it is distinguished by air and moisture permeability. The product can be packed in a compact roll, making it easy to transport and store. Its height is 17 cm, and the largest load on one berth is 90 kg.

• The Flash model is an asymmetrical product with medium stiffness sides. On the one hand, the filling materials are coconut board and Smartflex, they provide moderate rigidity, the other side is softer, the elastic material Smartflex is chosen as a layer. The height of the product is 20 cm, the largest load on one berth is 100 kg.

The "Vegas" A5 mattress has an asymmetric shape, made of modern high-quality hypoallergenic materials. One of the sides has an average level of rigidity, thanks to the MemoryFoam with the memory effect, the muscle frame is qualitatively supported, the spine is relieved. The second side is much softer, made from Vegaflex Pro. Its surface instantly reacts to the load, distributes it evenly. The height of the product is 16 cm, and the maximum load on one berth is 120 kg.

Cocolatex children's mattress is an asymmetrical model with sides of different hardness. One of them is made of coconut coir, therefore it has the maximum degree of rigidity, which is necessary for the baby in the first years of life to form the correct posture. At the heart of the second side is a softer material - latex, thanks to it, the necessary support for the spine is provided. To create the model, only natural and hypoallergenic materials are used that allow air to pass through. The height of the product is only 8 cm.

Spark is an asymmetrical product with different sides of the stiffness. One of them has a moderate degree of hardness, the other is soft. The product is based on the Bonnell spring block. The material of the layers is coconut coir. The height of the product is 17 cm, the maximum load on one berth is 90 kg.

• The "HIT E1" mattress has sides with varying degrees of rigidity. The product is based on an independent spring unit that provides orthopedic support for the body contour. On one side there is a layer of AirFoam material, on the other - pressed coconut fiber. The product is suitable for those who cannot decide on the firmness of the mattress. Its height is 18 cm, the largest weight per berth is 100 kg.

• Mattress "HIT 2" consists of a block of independent springs TFK, guarantees orthopedic support and maximum comfort. Perfectly adjusts to all contours of the human body. One side is made of medium-hard, hypoallergenic AirFoam, and the other is made of soft Smartflex material for excellent sleep. The height of the product is 18 cm, the maximum load on one berth is 100 kg.

Having carefully studied the customer reviews, we can confidently say that they are more pleased with the price, frequent discounts from the manufacturer, and high-quality manufacturing materials. The products are distinguished by their elasticity, they are pleasant to the touch, comfortable and practical. A big plus is the removable cover, thanks to which the product can be kept clean.

Of the minuses, it can be noted that some models have a disgusting smell, over time the covers turn yellow, and the manufacturer did not provide the opportunity to purchase others. Many people report back pain and sleep disturbance, and the company cannot make a replacement product.